说明书 SHARP FO-51

[. . . ]

       FO-11/FO-51/FO-71 1. 10. MODEL FO-11/FO-51/FO-71 FACSIMILE OPERATION MANUAL Installation Sending Faxes Receiving Faxes Making Copies Making Telephone Calls Answering Machine Connection Special Functions Printing Lists Maintenance Troubleshooting all. book Page 1 Friday, April 5, 2002 11:44 AM Introduction Welcome, and thank you for choosing a Sharp facsimile!The features and specifications of your new Sharp fax are shown below. Automatic dialling Fax paper Rapid Key Dialling: 5 numbers Speed Dialling: 35 numbers Initial starter roll (included with machine): 10 m Replacement roll (not included): FO-20PR 30 m (12. 7 mm core) FO-11/FO-51: Tear off by hand FO-71: Automatic cutter 448 KB (approx. 15 seconds Horizontal: 8 pels/mm Vertical: Standard: 3. 85 lines/mm Fine /Halftone: 7. 7 lines/mm Super fine: 15. 4 lines/mm 5 pages max. [. . . ] This ensures that you will receive fax messages even if the answering machine?s tape fills up or the answering machine is not turned on. If you want to turn it on, follow the steps below: Note: When this function is turned on, make sure that the answering machine is set to answer on 4 rings or less. If it isn?t, the fax will always answer first, preventing callers from leaving voice messages. 1 2 3 Press FUNCTION Display: once and 4 once. OPTION SETTING Press 5 times. FAX RX A. M. FAILS Press 1 to turn on the function, or 2 to turn it off. 4 STOP Press to return to the date and time display. 53 6. Answering Machine all. book Page 54 Friday, April 5, 2002 11:44 AM 7. Special Functions Caller ID (Requires Subscription to Service) If you subscribe to a caller identification service from your telephone company, you can set your fax machine to display the name and number of the caller while the fax rings. To use this function, you must subscribe to a caller identification service from your telephone company. ?Your fax may not be compatible with some caller identification services. Display: 1 2 Press FUNCTION once and 4 once. OPTION SETTING Press once. CALLER-ID 3 Press 1 (YES) to turn on Caller ID. 1=YES, 2=NO (To turn off Caller ID, press 2 ) 4 STOP Press to return to the date and time display. 54 all. book Page 55 Friday, April 5, 2002 11:44 AM Caller ID (Requires Subscription to Service) How Caller ID operates When you receive a call, the name and phone number of the caller will alternately appear in the display, beginning just before the second ring. The information will continue to be displayed until the line is disconnected. Note: Some caller ID services may not provide the name of the caller. In this case, only the phone number will appear. Display example JOHN DOE 525-8693 Caller?s name Caller?s number Display messages One of the following messages will appear while the fax rings if caller information is not available. NO SERVICE No caller information was received from your telephone company. Make sure that the telephone company has activated your service. CALLER-ID ERROR Noise on the telephone line prevented reception of caller information. PRIVATE CALL Caller information was not provided by the telephone company at the caller's request. 55 7. Special Functions OUT OF AREA The call was made from an area which does not have a caller identification service, or the caller's service is not compatible with that of your local phone company. all. book Page 56 Friday, April 5, 2002 11:44 AM Caller ID (Requires Subscription to Service) Viewing the Caller ID list If you subscribe to a Caller ID service and have turned on the Caller ID function, your fax machine will keep information on the most recent 20 calls and faxes you have received. You can view this information, which consists of the name and number of each caller, in the Caller ID List. ?After you have received 20 calls, each new call will delete the oldest call. Follow the steps below to view the Caller ID List in the display. If desired, you can immediately dial a number when it appears. 1 2 3 Press HOLD/ SEARCH once and 2 once. REVIEWING CALLS Press or to scroll through the list. If you want to dial one of the numbers in the list, scroll through the list until the number appears in the display. ?Fax: If you want to send a fax, load the document and then press START . Fax: START Dialling and transmission begin. ?Voice call: If you want to make a voice call, pick up the handset or press SPEAKER . Dialling begins automatically. SPEAKER Voice call: (If you pressed , pick up the handset when the other party answers. ) 4 STOP Press when you have finished viewing the list. 56 all. book Page 57 Friday, April 5, 2002 11:44 AM Caller ID (Requires Subscription to Service) To delete calls from the Caller ID list If you want to delete a single call from the caller list, press 0 while the call appears in the display. If you want to delete all calls from the list, hold 0 down for at least 3 seconds while you are viewing any number in the list. Priority Call With Caller ID turned on, you can set your fax to make a special ringing sound when you receive a call from a designated phone number. This lets you know immediately who is calling without having to look at the display. To use this function, enter the desired phone number by following the steps below (only one phone number can be entered). Display: 1 2 3 Press FUNCTION once and 3 once. ENTRY MODE Press once. PRIORITY CALL # Press 1 to store a number. 2 4 5 6 Enter the number by pressing the number keys (max. [. . . ] jW / rs

 
   - 4UDp
LD` ! $ChUJp
` 2$` # 2` ?Lϯ#MNO/N$O>:;<56%k/ #

 
 
- ]7J fg  ' ||:|3[\. Ȩ1! ":;</

 
   ] 4   Ʒ). ϯ:;</ȅJ;" :;</
-
    
        !"# $ %&'()*+  ? [. . . ]